MadPsy

Forum Replies Created

Viewing 25 posts - 1 through 25 (of 88 total)
  • Author
    Posts
  • in reply to: Rig Pix #1277462
    MadPsy
    Participant

      The low mid? yeah they run at half power (@ -3dB not -6dB (which is half the voltage), pretty much idling, and keep up with the rest 🙂 All Fane loaded.

      in reply to: Rant Thread! #1132025
      MadPsy
      Participant

        TBH I don’t know much about consumer SSDs as I’ve never yet bought one. I guess it’s a case of SLC vs MLC, the number of IOPS you want and the max real-world throughput (synchronous and random read/writes). One thing I do know is TRIM support is essential on whatever OS you use it with.

        If its extreme performance you’re after than a PCI-e card rather than a drive is what you want (a drive being something using SATA). One of the reasons I got a macbook was it’s thunderbolt port which is actually a PCI-e bus allowing you to literally use PCI-e cards (via an external bay thing) via that port on a laptop (2x10gbps) – nice idea from Intel that one. Who’d have thought you could plug full size PCI cards into a laptop 😉 Unlike USB, Thunderbolt – because it’s on the PCI bus – has direct access to memory, which could be easily exploited. Slightly OT there me thinks 🙂

        in reply to: Rant Thread! #1168397
        MadPsy
        Participant

          TBH I don’t know much about consumer SSDs as I’ve never yet bought one. I guess it’s a case of SLC vs MLC, the number of IOPS you want and the max real-world throughput (synchronous and random read/writes). One thing I do know is TRIM support is essential on whatever OS you use it with.

          If its extreme performance you’re after than a PCI-e card rather than a drive is what you want (a drive being something using SATA). One of the reasons I got a macbook was it’s thunderbolt port which is actually a PCI-e bus allowing you to literally use PCI-e cards (via an external bay thing) via that port on a laptop (2x10gbps) – nice idea from Intel that one. Who’d have thought you could plug full size PCI cards into a laptop 😉 Unlike USB, Thunderbolt – because it’s on the PCI bus – has direct access to memory, which could be easily exploited. Slightly OT there me thinks 🙂

          in reply to: Rant Thread! #1168394
          MadPsy
          Participant

            My suggestion would be anything made by QNAP – you get them loaded or unloaded. They stream every protocol under the sun too, which is nice.

            in reply to: Rant Thread! #1132024
            MadPsy
            Participant

              My suggestion would be anything made by QNAP – you get them loaded or unloaded. They stream every protocol under the sun too, which is nice.

              in reply to: What drivers would you recommend for a suicide rig? #1277263
              MadPsy
              Participant

                Loading in an 1850 leaves you limited choices of drivers AFAIK. Be better with reflex cabs – cheaper to build and can use any driver.

                If it really is going to be a kamikaze rig I wouldn’t be caring too much about drivers. I’m now curious what you have in terms of the rest of rig that you’re willing to give up to the ol’ bill.

                in reply to: What drivers would you recommend for a suicide rig? #1277262
                MadPsy
                Participant

                  Why not just find a better venue so it doesn’t get seized in the first place?

                  Do me a favour and use good quality drivers so I can buy it back at a police auction.

                  in reply to: I suspect [username] is the Police #1249937
                  MadPsy
                  Participant

                    This thread never fails to amuse :yakk:

                    in reply to: Trying to throw a small rave party #1276213
                    MadPsy
                    Participant

                      Unless its 700 rupees then absolutely not worth it.

                      I bought the Dell ML110 LED projector when it first came out, and even then it was only £150. I soon learnt small and delicate is not what you want for a outdoor party. That LG thing won’t be bright enough (it may be brighter than the originals, but no match for a real bulb) and it’ll be fragile, which may sound ironic comparing it to a bulb, but it’s likely true (think connector strength etc). Mine is now missing a range of colours too, so pretty much fucked. Lets assume you’re talking Pounds. For 700 you can get 2 decent full size HD projectors (mount them in modified foam lined flight cases!) or as Chrispydelic says, a laser. Lasers are infinitely brighter and much better party material for ‘looking cool’. As long as its a high scan rate ILDA compatible job it’s what you want.

                      Can’t recommend anything in particular as there’s so many to choose from. Don’t knock all the Chinese imports from EBay though, after all everything is made in China and they’re putting out some well made alternatives to the branded ones. That being said, Equinox seem to be the make of choice in the budget range, as they’re reasonably priced and come in many pretty colours (again, as long as it says ILDA compatible it should look sweet).

                      in reply to: 1210 mk2 spares #1276211
                      MadPsy
                      Participant

                        Hmm can you tell I’ve not actually looked at it yet.. seems the motor is soldered directly onto the main board. Nice.

                        Going to check for sure that it’s not just the power supply before committing to anything.

                        in reply to: Edcast Reborn #1276141
                        MadPsy
                        Participant

                          Dear oh dear GL – don’t think I’ve ever heard you swear so much before 😉

                          It’s never been acceptable to use the transmitter to alter the audio, it’s job is to take an input, convert the medium, and output in a true a form as the original input as possible.

                          in reply to: Edcast Reborn #1276140
                          MadPsy
                          Participant

                            The question is, what work does it really need? Porting maybe, but IIRC is was pretty bug free when they stopped.

                            in reply to: Cant we mix it up a bit? #1276118
                            MadPsy
                            Participant

                              I’m guessing fucking facebook. I’m not on Facebook and seems the rest of the world is.

                              Would be a real shame if Anonymous played a halloween ‘trick’ on them.

                              in reply to: Cant we mix it up a bit? #1276117
                              MadPsy
                              Participant

                                As good as banter is, right now I’d love a live radio show 😀

                                MadPsy
                                Participant

                                  The answer is ‘butt’ as GL mentioned.

                                  It works just fine.

                                  in reply to: I miss my little transistor radio! #1276108
                                  MadPsy
                                  Participant

                                    @Pat McDonald 557884 wrote:

                                    Either fit better sights to your weapon or use a shotgun to make sure it’s in the kill zone.

                                    Or use a Ghetto Blaster – those ones which take 30 D cell batteries. Much better chance of hitting.

                                    in reply to: I miss my little transistor radio! #1276107
                                    MadPsy
                                    Participant

                                      There’s a good TED talk about how more choice is not always a good thing. The typical example is when you have more to choose from the less satisfied you are with your choice. Applies to everything from food to clothes to cars to laptops etc.

                                      When there’s so many things to choose from you can’t help but think ‘I wonder if this other one was better…’ whereas if there’s only two things, and you know the difference, it’s a lot easier to make a choice and be satisfied with that choice.

                                      That company called Apple know all about this, that’s why they have a limited product range, so their customer’s aren’t confused and generally satisfied with their choice at the time.

                                      And yes… who doesn’t love a bit of pirate radio; playing music the people want.

                                      in reply to: Volume Faders or Crossfader? #1257739
                                      MadPsy
                                      Participant

                                        The trim pot sets the gain from the input, before any gain introduced by the EQ. I thought the fader was post EQ. Got myself an NUO 3.0 for playing about with, I should go experiment me thinks 🙂

                                        Edit: Think I get it now, ignore that comment.

                                        in reply to: Volume Faders or Crossfader? #1257738
                                        MadPsy
                                        Participant

                                          I have no idea how to mix, but surely the faders are to level the input after the EQ stage and the faders are to do the crossing between tracks. Meh.

                                          in reply to: DE : Germany had broadband radio since 1930s! #1276006
                                          MadPsy
                                          Participant

                                            That’s almost genius. It’s amazing what you can shove down long haul twisted pair copper.

                                            in reply to: Express Something Thread #1259204
                                            MadPsy
                                            Participant

                                              The saving part is so you can pay for things without making you skint that month really. So when my timing belt needs changed I don’t have to eat beans on toast.

                                              Disclaimer – I don’t actually save, but I’m starting to realise I kinda need to. Especially because my timing belt does actually needs changed!

                                              What I’m most worried about is having to pay for rent when I’m 70 because I’ve no job and not been able to buy a house.. wtf do you do then? I don’t buy much at all, certainly not little shity things I don’t need. I usually buy expensive things which are well made and aesthetically pleasing, maybe twice a year I treat myself to something but I’ll use the shit out of it. Nothing worse than buying things that never get used or only used a couple of times. I don’t have a modern phone or buy many clothes etc but I’d happily spend a grand on a Macbook and a nice car. Everyone at work is out buying the latest tablet and I just don’t see the point. We live in a consumer driven world (Bill Hicks sketch ‘little happy consumers’ comes to mind). Capitalism is based on growth so they need people to buy buy buy to keep the wheel spinning. We can’t keep growth up like that as everything you buy requires earth’s materials which are finite. it’s not rocket science it’s common sense that exponential growth fuelled by needless consumerism isn’t sustainable.

                                              in reply to: What’s Your Special Forum Power [username]? #1260012
                                              MadPsy
                                              Participant

                                                :lol_big::lol_big:

                                                Raw entertainment.

                                                in reply to: How do I…. ? #1275808
                                                MadPsy
                                                Participant

                                                  Perfect thanks.. Yes that Acid Techno thread was the right one and the advanced search is what I was after 🙂

                                                  in reply to: How a radio signal can be located. #1273286
                                                  MadPsy
                                                  Participant

                                                    So who wants to start a pirate radio station?

                                                    The old school way to do it was get an abandoned flat up a high riser, set up the transmitter and antenna there and use an old sky dish with a UHF transmitter and broadcast the signal from another flat across the road. That way the DJ isn’t in the same building as the transmitter. The problem with that was you can easily see the line of sight where the LNB is pointed.

                                                    Much easier to do with WiFi now but still need 2 locations and either a proper built Yagi or a Pringles Can:

                                                    How To Make A WiFi Antenna Out of A Pringles Can

                                                    Still need a nice stereo FM transmitter, preferably one with one RDS to be one of the cool cats.

                                                    in reply to: NL : old style outside broadcast equipment.. #1275797
                                                    MadPsy
                                                    Participant

                                                      Nice.

                                                      When I think of reporter’s phone I always think Glensound stuff like this..

                                                      [ATTACH=CONFIG]85714[/ATTACH]

                                                    Viewing 25 posts - 1 through 25 (of 88 total)